The Powerware 3-phase provides a wide range of communication options regardless of how
simple or complex your needs may be. It displays information in a variety of formats
from LEDs to a network or mainframe notification.
Software Suite
The Software Suite is bundled with all Powerware 3-phase UPS. The SW Suite includes
all current Powerware SW products.
- LanSafe for network shutdown
- PowerVision for advanced UPS monitoring and performance analysis (30 days trial period)
The Software Suite CD-ROM also includes demos, brochures, documentation and videos.
The Suite's intuitive wizards make it easy to choose and install the right software
for each application.
- Double conversion topology – non-stop perfect power for the load. The right solution for any 24/7mission-critical application.
- ABM™ – reduces battery corrosion and gives 50% longer battery lifetimes compared to traditional trickle charging methods.
- Hot Sync™ parallelling technology – allows parallel operation of four UPS units, bringing system vailability close to 100%.
- Transformerless UPS design with 3-phase – easy to move and install anywhere thanks to its light weight. Provides bypass balanced loading of the mains in bypass mode.
- Wide input voltage and frequency window – less need for battery operation for longer battery life time. Battery is kept fully charged at all times for increased reliability
- Supports continuous 100 % unbalanced loading – flexibility, loads can be started and stopped without minding their balancing.
- Frequency 50/60 Hz, selectable – frequency conversion possibility.
- Battery start – can be cold-started without mains
ConnectUPS™ SNMP Adaptors
When the Powerware 3-phase UPS is located away from the equipment it protects,
connectivity devices have to be used for communication with computers and
monitoring/management platforms. The Powerware3-phase UPS communicates over the
network through an external ConnectUPS SNMP adaptor plugged direct into the unit.
The ConnectUPS adaptors easily integrate with SNMP-compatible network management
solutions, such as HP OpenView, CA Unicenter, IBMTivoli NetView and many others.
Flexible installation and serviceability
Reduces installation time and costs with small footprint and flexibility to
install against walls using top- or bottom-entry cabling. Front-panel access
for all services and operation increases serviceability and reduces repair time.
The Powerware 3-phase widely covers the needs of power protection in many
applications that rely on continuous, conditioned power. In true Powerware style,
it also sports features that make operation and maintenance a breeze.
Advanced Battery Management™
UPS systems have a maintenance free lead-acid battery solution that is both
critical and expensive for the user. The expected lifetime of batteries is also
shorter compared to the rest of the UPS system. Therefore, one should pay close
attention to the right battery solution with advanced charging technology.
Today, virtually all competitive UPS products on the market have VRLA batteries
with traditional float charging technology. ABM™ is different because of
the three-stage charging technique that constantly monitors the battery charging
status and recharges only when necessary. In result the internal battery corrosion
is reduced dramatically to provide 50% longer battery life time compared to the
float charging technology.
Powerware Hot Sync™ Technology
The absolute reliability of UPS system can be increased close to 100% with
the US patented Hot Sync™ parallel load sharing technology. It is designed
for parallel redundant N+1 systems tosatisfy the 7/24h applications. The Hot Sync™
canal so be used in parallel capacity systems to benefitfrom the scalability for
customer's ever increasing load demands.
Competitive UPS products on the market utilise centralised or distributed load
sharing technology with master-slave principle. The Hot Sync™ erases the
single point of failure logic within the traditional load sharing systems because
of the ability to synchronise and support the critical load independently of the
other UPS modules. The UPS modules can share a critical load even without any
communication wiring to outside world.
Moreover, the Hot Sync™ technology allows full maintenance to be performed
one-by-one on redundant UPS modules without the external maintenance bypass switch.
The critical load needs not to be removed from the conditioned power. Scheduled or
unscheduled maintenance needs canbe performed with the critical load supported
constantly by the UPS grade clean power.
Efficiency Optimiser™
The high efficiency mode can be activated by the operator. It forces the Powerware
3-phase UPS to use the bypass source when the mains power quality is acceptable for
the load. However, the UPS transfers to double conversion or battery mode if a serious
powerproblem threatens the load. In consequence, the Efficiency Optimiser™ cuts
down the electrical bill by minimising power losses.
Depending on your needs, you can choose from several alternative configurations
Standard System
A single UPS unit capable of supplying power to the critical load. The critical load
is transferred to the bypass source via the static switch if the unit fails or the
load becomes too great. A mechanical bypass switch is used for maintenance purposes.
Hot Standby System
When the criticality of your load is greater, you can opt for two single UPS units
with a special connection to increase power availability. The critical load is
powered by the first UPS unit. In case of failure, the critical load is transferred
to the bypass source thatis supplied by the second unit. This configuration
enables redundant operation with standard UPS units.
Hot Sync™ Redundancy or Capacity
Hot Sync™ Redundant is N+1 module system for the most critical applications
and allowing full maintenance to be performed on a single module without the need
for an external maintenance bypass switch. The critical load never needs to be removed
from conditioned power.
Hot Sync™ Capacity can accommodate up to four modules in parallel for the most
maximum output power. Hot Sync™ Redundant can be easily switched Hot Sync™
Capacity as the power requirement grows and there is no time to wait the redundant
upgrade module.