True on-line UPS units provide the highest level of protection. An on-line UPS absorbs the incoming AC supply, converts it to DC then inverts it to AC to supply critical power loads. An inverter supplies regulated AC power to loads at all times; either from rectified mains or a battery with an on-line UPS.
In the event of a blackout, there is no transfer time or break in power supply.
Most on-line UPS units contain an automatic bypass to ensure continuous power supply during a short-term overload or UPS failure. They are ideal for critical loads, sensitive equipment such as medical or scientific technology and industrial loads. All on-line UPS units are fully generator compatible. These UPS units are often referred to as double conversions because they can convert from AC–DC to DC–AC.
MGE Pulsar M UPS – 700/1000/1500VA
- Double conversion on-line UPS with automatic by-pass and power factor correction.
- Remote supervision – a wide range of options using the Solution-Pac supplied: SNMP and HTML, ModBus/JBus and relay outputs.
- Available in tower format or RT2U convertible rack/tower version (for shallow rack mounting). With FlexPDU and HotSwap MBP, the RT2U models can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit.
- Rated for 0.9 total power factor
- USB + serial + remote start/stop + slot for optional communications card.
- Output sockets individually controlled to provide load-shedding to maximise the backup time. Remote reboot and sequential start-up as standard.
- Hot swappable batteries.
- Long backup times – 1 to 4 EXB battery units can be added to the Pulsar 1000 or 1500.
MGE Pulsar M UPS - 2200/3000VA
- Remote supervision – wide range of options usingthe Solution-Pac supplied: SNMP and HTML,(Network Management Card included with Netpackversions), ModBus/JBus and relay outputs.
- Long backup times – built-in high speed charger foradditional long backup times.
MGE Pulsar MX UPS – 4/5/15/20kVA
- LCD multilingual display with mimic and LEDs for rapid view of the UPS status, diagnostics and event log
- IEC 10A and 16A outlet sockets and hardwired outputs
- Built-in Powershare system for remote reboot of the equipment connected, sequential start-up or load shedding while operating from battery to maintain the power to critical loads
- Compatible with three phase or single phase supplies
- Backup time – 10 mins up to two hours by adding 3U battery extension modules
- Rated for 0.9 total power factor
- When the power supply needs to be upgraded, the Pulsar MX 4000 and 5000 can be paralleled to provide 8kVA or 10kVA using the ModularEasy kit, without extra cost on the initial purchase
- Two front access hot-swappables sub-modules (power and battery)
- Automatic battery test
- Internal bypass built-in to supply the load even if the UPS fails
- Large input voltage and frequency ranges to avoid using the batteries unnecessarily
- Can be used as a free-standing tower unit or 19" rack-mounted – only 3U for Pulsar MX 4000 and 5000, 16U for Pulsar MX Frame
MGE’s new Pulsar MX 5000 RT power and battery modules give users a true modular and scalable power protection solution.
As small and mid-size companies grow, so do their power requirements to protect additional servers, blades and telecommunication systems. To meet this need, the Pulsar MX 5000 RT power and battery modules and Pulsar MX Frame that is a fully scalable solution that can grow as customer’s power needs increase. Designed to deliver business continuity 7X24, the Pulsar MX uses a modular, redundant architecture that can scale power and runtime as demand increases or when higher levels of availability are required – all in a compact and affordable system.
Overview – top points:
- Future proofing with modularity with no upfront price premium
- Online dual conversion topology providing high availability
- Dynamic redundancy providing flexibility
- Compactness and ability to rack mount the frame 16RU ONLY
- Versatile output sockets, mixture of 10amp, 16amp and hardwired output
- Flexible Power Source, 3phase or single phase as standard
The MGE Comet EX RT UPS provides true on-line protection for 7kVA to 11kVA. The MGE Comet EX RT UPS provides high end protection for Servers (rack or tower), networking/VOIP, telecom equipment, medical equipment, storage and sensitive/electronic equipment
- 1-phase: 1-phase
- 3-phase: 1-phase
- Protection against power failure, sags, surges, transients and electrical noise
- Extra long battery time available
- Advanced communications for monitoring the UPS and its interactivity with other LAN devices
- Generator compatible
- Standalone or rack mount
- Hot swappable power module with standard maintenance bypass switch
- Hot swappable battery module
- Rackmount versions also available
The Powerware 9120 UPS is designed to protect critical computer and communication equipment as well as industrial and automation applications, where losses may accumulate at frightening speed in case of power failure. The Powerware 9120 is a true Series 9 double conversion on-line UPS designed to guarantee troublefree operation of protected equipment in any physical or system environment. Versatile management and hardware options offer the flexibility to build up a power protection solution to fit any application.
- Double conversion on-line technology
- Connect UPS-BD Web/SNMP card
- External battery cabinets
- Relay card
- Maintenance bypass options
- External battery chargers for fast recharge of longtime battery packs
- Transformer options
- Frequency Converter model
- Extended back up time
- User friendly informative LCD
- ABM™ prolongs battery life by 50%
- Software suite bundled
- Versatile customisation options
- Australian outlets for ease of connection
The Powerware 9125RM UPS was designed for flexibility to meet the requirements of critical rack mounted equipment. Only 2U high for 1-3kVA ratings and 5U for 6kVA, the Powerware 9125RM UPS saves valuable rack space for other equipment. The Powerware 9125RM promises premier protection, longer backup time, remote manageability, installation, flexibility and superior service all available in real rack mount mechanical pact for critical applications
- Protection against power failure, sags, surges, transients and electrical noise
- ABM™ doubles battery life
- Hot swappable batteries with fast recharge
- Optional extra battery pack
- Advanced communication slot including software which monitors the status of the power and UPS
- Flexible size options – 1000VA, 2000VA, 3000VA and 6000VA
- Standalone or rack mount – 2RU
- Constant supply of 240 volts
- True on-line double conversion
The Powerware 9140 uninterruptible power system (UPS) delivers de-centralized power protection and power management for medium- and high-density UPS environments and rackmount UPS power management for expanding loads in shrinking spaces. Providing increased power density and power protection capabilities, the Powerware 9140 rackmount UPS delivers efficient, reliable power protection in only 6U of rack space, including batteries.
This double-conversion, online rackmount UPS resolves all nine common utility powerproblems and supplies clean, continuous power to all connected equipment. If utility power goes out altogether, there is no delay transferring to backup power, either to UPS batteries or an auxiliary generator.
Features and Benefits
- Protects mission-critical rackmount applications from downtime, data loss/corruption, and process interruption by providing continuous, clean power with double-conversion, online topology
- Conserves valuable rack space with up to 10 kVA of power in only 6U of height, including batteries
- Pre-installed rackmount hardware significantly reduces installation time
- Modular, lightweight design facilitates installation and improves service time
- Upgradeable from 7.5 kVA to 10 kVA, to accommodate system growth
- Blade-server compatible with standard IEC receptacles
- ABM® technology significantly increases battery life, resulting in more uptime and fewer battery replacements
The Powerware 9155 UPS features active input power factor control and low (less than 5%) total harmonic distortion with IGBT rectifier technology. The Powerware 9155 UPS operates using the unique ABM™ function. While traditional UPS charges batteries continuously, ABM™ charges batteries only when necessary, thus preventing battery corrosion. The exceptional ABM™ function prolongs the service life of batteries by up to 50%.
- 1-phase: 1-phase – 8kVA and 10kVA
- 3-phase: 1-phase – 12kVA and 15kVA
- ABM™ providing up to 50% longer battery life time
- Active input power factor correction (PFC) providing <5% THD(i)harmonics
- High 0.9 pf output rating for server and high computer loads
- User friendly graphical LCD display with light blue back light
- Web/SNMP and ModBus monitoring capability
The Powerware 9170+ UPS is uniquely designed to meet ever-changing customer needs. Built for a global audience, the POwerware 9170+ UPS is a scalable, modular, flexible solution that combines the highest level of reliability with the lowest cost of ownership in the 3–18kVA range.
The Powerware 9170+ UPS enables customers to build a power solution specific to their needs, with an expandable level of redundancy and increase run times through plug-and-play 3kVA UPS and battery modules. The Powerware 9170+ UPS can be configured to fit three, six, nine, or twelve slot enclosures, and is available for rack-mount applications.
- ABM™ extends battery life by up to 50%
- Virtually eliminates downtime through N+X redundancy – N+X redundancy for both power and logic eliminates system level single point of failure. Optional scalability through power and/or battery modules
- BD Slot Connectivity options – configurable connectivity
- Non-dedicated slots – universal components (UPS batteries and extra chargers) fit in any order without affecting UPS operation
- Lightweight components – lightweight UPS modules and split battery modules enables installation by a single person. The lightest battery modules in the industry!
- Logic controls in each modules – logic controls in each individual UPS module eliminates system level single points of failure. Competitive products feature logic controls housed within the system cabinet.
- Rack and tower module compatibility – UPS and battery modules are common in both tower and rack mount cabinets maximising your investment in multiple systems. All modules can be transported and re-used in all configurations.
The Powerware 9355 UPS is designed to protect high 0.9 pf rated, critical computers and servers. The centralised UPS protection is an essential part of IT infrastructure in today’s IT, telecom, healthcare, banking and industrial automation applications.
- 3-phase: 3-phase
- Hot Sync™ redundancy
- ABM™ providing up to 50% longer battery life time
- Active input power factor correction (PFC) providing <5% HD(i)harmonics
- High 0.9 pf output rating for server and high computer loads
- User friendly graphical LCD display with light blue back light
- Web/SNMP and ModBus monitoring capability
- Software Suite bundled
The Powerware 9355 UPS is designed to protect high 0.9 pf rated, critical computers and servers. The centralised UPS protection is an essential part of IT infrastructure in today’s IT, telecom, healthcare, banking and industrial automation applications.
- 3-phase: 3-phase
- Hot Sync™ redundancy
- ABM™ providing up to 50% longer battery life time
- Active input power factor correction (PFC) providing <5% HD(i)harmonics
- High 0.9 pf output rating for server and high computer loads
- User friendly graphical LCD display with light blue back light
- Web/SNMP and ModBus monitoring capability
- Software Suite bundled
Built upon 40 years of power management experience, performance and continuous innovation the Powerware 9390 UPS provides the best combination of power performance, battery management, scalable architecture, flexibility, power density, and warranty and service.
Enhanced scalability
Utilises Powerware Hot Sync™ technology to parallel for capacity and redundancy. Up to four UPS modules can be paralleled without a tie cabinet, while a total of eight modules can be paralleled (providing a total capacity of 1280kVA) by using a tie cabinet.
Best total battery management
Extends battery life and optimises battery recharge time via patented Advanced Battery Management technology.
Integrated battery management system tests and monitors battery health.
Optional temperature-compensated charging monitors battery temperature and extends battery life. Variable battery buss matches battery capacity to exact customer runtime.
Enables remote monitoring of the UPS and battery system.
Flexible installation and serviceability
Reduces installation time and costs with small footprint and flexibility to install against walls using top- or bottom-entry cabling. Front-panel access for all services and operation increases serviceability and reduces repair time.
- High efficiency – up to 94%
- Parallel systems with Hot Sync™ redundancy and scalability
- ABM™ providing up to 50% longer battery life
- Active input Power Factor Correction (PFC) providing up to 5% THD(i) harmonics
- High output power factor for PFC controlled server and computer loads
- SNMP/Web communication offered as standard or optional
- User friendly graphical LCD display with multilanguage support
- Build-in mechanical bypass switch(40–80kVA)
The Powerware 9370 incorporates the latest technology double-conversion, on-line design and provides complete isolation from all incoming utility and generator related power problems. This ensures the highest level of protection for your critical load.
Complete digital control is implemented through an internal CAN bus. The advanced UPS control system is integrated into a very compact cabinet and provides a machine that is optimized in terms of layout and component choice. This makes the Powerware 9370 a market-leading product, with an extremely attractive price-performance ratio.
- Powerware Hot Sync® parallel up to 8 units
- Completely digital control, using CAN bus technology (typically for harsh environments)
- Excellent output voltage stability, ideal for 100% step loads, also unbalanced and nonlinear loads
- 12 Pulse rectification standard for 400-500 kVA
- Internal static and manual bypass
- Top & bottom cable entry standard for 400-500 kVA
- Inherent reliability through distributed control, power supply and cooling system redundancy
- Easier maintenance with front access for installation and service
- Software Suite with full compatibility
- Industrial controls
- Manufacturing machinery
- Process equipment
- Transportation
- Security
- Telecommunication
- Large computer systems
- Server and Data centers