Relay Interface Cards

The X-Slot Relay provides essential dry-contact interface between your UPS and any relay-connected computer.

X-Slot Relay interface cards enable automatic shutdown and network monitoring of UPS systems through a connected computer for the best UPS power protection.

Provides simple alarm notification via isolated contacts to signal remote annunciation panels or security systems in the event of a change of state in the UPS operation.

Network Management Cards

The Network Management Card provides Web/SNMP communication for UPS remote supervision and automatic server shutdown.

The Network Management Card (NMC) is both an SNMP agent and an HTTP/Web server. Its compact form factor has been specifically designed for the Powerware & MGE UPS.

It enables UPS supervision from any Network Monitoring System using SNMP & traps or simply from any web browser (with possibility to activate SSL security).

Modbus Card

Connectivity device that provides continuous, reliable and accurate remote monitoring of a UPS system through a Building Management System (BMS) or Industrial Automation System (IAS).

The card provides the means to integrate data from the UPS into the user-provided management system using Modicon®‚ Modbus RTU Protocol.

Key power quality and UPS status information may be monitored in real-time to aid in the management of the UPS and notification of potential power problems.

Multiport Card

Powerware X-Slot Serial Multi-Server Card provides out-of-band serial communication with LanSafe software when Ethernet connectivity is not available or required.

Load segment control is mapped to specific serial ports on the card to provide selective control over critical loads.

This allows separate communication with up to six connected servers with mixed operating systems.

Enviromental Monitoring Probe

Powerware Environmental Monitoring Probe monitors temperature, humidity and status of two contacts/sensors.

Compatible with Connect UPS/Web SNMP card. Can be located up to 20 meters from UPS. Measures relatively humidity between 10 and 90%.

Displays status on web page, IP phone or PDA, or network management system. Auto sends alarms via email, PCS phone or pager Sends SNMP alarms to network management systems

Lansafe Software

LanSafe power management software provides, in combination with an uninterruptible power system (UPS), the best possible protection for this valuable data.

Whether at home or at work, LanSafe has you covered with its unique, proactive risk-management features.

Sequential SafetyNet shutdown UPS group shutdown and control Work-in-progress saved throughout the network Stealth Mode Operation