Powerware X-Slot Relay Card

Image

Actions

The X-Slot Relay provides essential dry-contact interface between your UPS and any relay-connected computer.

X-Slot Relay interface cards enable automatic shutdown and network monitoring of UPS systems through a connected computer for the best UPS power protection.

The relay interface cards are available in two models, the X-slot version and BestDock version. Both are dedicated adapters that provide the essential dry-contact interface between your UPS and any relay-connected computer, including the AS/400, as well as a variety of industrial applications.

Product Highlights:

  • Increases reliability and system availability
  • Provides isolated dry contact Form-C relay outputs for utility failure, low battery, UPS alarm/OK, and on bypass.
  • Speeds corrective action by delivering alarm notification through any combination of email, SNMP traps, or NetWatch network message.
  • Is user-selectable for normally-open (NO) or normally-closed (NC) contacts.
  • Enables remote shut down of the UPS.
  • Comes equipped with DB-15 output connection and terminal block outputs on X-Slot model.
  • Adapts to IBM iSeries® (AS/400®) applications with optional cables
  • Works with the following Powerware UPS products: Powerware 5115RM, 5125, 9120, 9125, 9155, 9170+ and 9315.

 

Powerware AS-400 Relay Card

Image

Actions

The AS-400 Relay provides essential dry-contact interface between your UPS and any relay-connected computer.

Relay interface card provides potential free true relay interface for AS/400 and other relay connected computers and industrial applications.

Both are dedicated adapters that provide the essential dry-contact interface between your UPS and any relay-connected computer, as well as a variety of industrial applications.

Product Highlights:

  • Increases reliability and system availability
  • Provides isolated dry contact Form-C relay outputs for utility failure, low battery, UPS alarm/OK, and on bypass.
  • Speeds corrective action by delivering alarm notification through any combination of email, SNMP traps, or NetWatch network message.
  • Is user-selectable for normally-open (NO) or normally-closed (NC) contacts.
  • Enables remote shut down of the UPS.
  • Relay interface uses a 15-pin D-sub connector.
  • IBM iSeries® (AS/400®) applications with optional cables
  • Works with the following Powerware UPS products: Powerware 5115RM, 5125, 9120, 9125, 9155, 9170+ and 9315.