Surge and Lightning Protection
A surge is a transient electrical fluctuation that happens in a fraction of a second and can cause serious damage to electronic and electro mechanical equipment.
They can be caused by lightning strikes and local power utility company "spikes" which can enter your business or home through the electrical system ie. cable television, telephone wiring etc and attack any electrical equipment attached to them.
Softwired Data Line Protection
Lightning and over-voltage transients are responsible for millions of dollars of damage each year affecting a wide cross section of industries.
Telecommunications sites are particularly vulnerable to the dangerous effects of lightning.
Many telecommunication installations consist of tall slender towers situated in elevated areas such as hill and mountain tops in regional areas and throughout metropolitan areas such installations can be found at the tops of tall buildings.
There is no single solution which can eliminate the risks associated with lightning induced energy.
It is through the use of an all encompassing approach such as the LPI 4 Step Approach to Lightning Protection which assists in significantly reducing the risks presented by the natural occurrence of lightning to a typical telecommunications site.
Products in this range:
|
LPI RS-Series Protector
|
|
LPI® RF/High Speed Coaxial Cable Data Line Protector, CF-90 is designed for Computers & Data Equipment. 90V DC spark over voltage / 75 Ohms impedance cable with “F” type connector (Female to Male) for bandwidth of 0 – 1 GHz. High performance surge protector for computers, terminals, printers and other peripheral equipment Moulded Construction, Low clamping voltage |
|
LPI LAN Protector
|
|
Surge protective device for PCs, servers and similar devices connected to a data network (cat 5) Widely used RJ45 suits both 10 BaseT and 100 BaseT Un-shielded twisted pair (UTP) ethernet networks. Max. Surge Rating@ 8 / 20μs: 500A Max. Working voltage (V L-L): 65V |
|
LPI RF-Series Coaxial Protector
|
|
LPI® RF/High Speed Coaxial Cable Data Line Protector, CF-90 is designed for 90V DC spark over voltage / 75 Ohms impedance cable with “F” type connector (Female to Male) for bandwidth of 0 – 1 GHz. |
|
LPI Telephone Line Protector - K10
|
|
The TLP-K10 is a multistage protection module designed for the protection of analogue telephone and data circuits against transient over-voltages caused by lightning, induced impulses and other voltage surges. Traditional shunt-connected gas filled arresters by themselves can no longer provide adequate or required protection for sensitive line cards or newer generation digital switching systems. High impulse rating. Wide operating frequency / Low insertion and return loss. |
|
LPI D-Series Protector
|
|
LPI D2 Series Protectors are designed to protect sensitive electronic circuits and components from damaging over voltages and currents. High performance surge protector for different working voltage, ranging from 6-80VDC Low peak clamping voltage, Nominal impulse discharge current 20kA, 8/20μs Able to repeatedly protect against surge current in excess of 10kA TS35 DIN rail mounting and grounding |
Product Menu
Product Categories:
